Flip-It® PVD Brushed Nickel replacement bathtub drain stopper
The Amazing Fit-All Replacement Tub Stopper in PVD Brushed Nickel
This stopper contains a unique ball-shift toggle system which opens and closes the drain with a simple push of the toe or finger.
- Will fit 90% of all tub drain openings - replaces all types of stopper assemblies
- Simple to install - no tools required for installation - simply affix "o" rings and press into drain
- One piece construction - made of top quality DELRIN or POM and ABS plastic, with a choice of Chrome Plated, Antique Brass, PVD Polished Brass and PVD Brushed Nickel.
|
PVD Brushed Nickel Tub Stopper comes with 10 "0" Rings to ensure a perfect fit in various size drains.
|
No Stooping or Bending
 |
Press into drain
- and it stays there!
 |
One piece construction replaces all types of stopper
assemblies. Do away with troublesome trip lever
parts and stoppers. Self contained unit, made
of top quality delrin/POM and ABS plastic.
When installed - looks better than the original stopper.
Made to be left in drain, yet easily removed for cleaning.
Comes with 10 "O" Rings to ensure a perfect
fit. Press into drain and it stays there!
Easy to Use. Simple to install. More finishes than any other drain product to match any decor. Great for you bathtub or shower.
Simple to install - no tools needed. Simply press into drain to form a water tight seal. You'll
never have to replace linkage, stoppers, buckets or springs
again!
Unique toggle system - Flip left to close, flip right
to open. Easy to use, with a simple push of your
finger or your toe.
Fits
over 90% of all tub drain openings.
One piece construction replaces all types of stopper
assemblies. Do away with troublesome trip lever
parts and stoppers. Self contained unit, made
of top quality delrin/POM and ABS plastic.
When installed - looks better than the original stopper.
Made to be left in drain, yet easily removed for cleaning.
Comes with 5 sets of "O" Rings to ensure a perfect
fit. Press into drain and it stays there!
Do It Yourself Plumbing Repair
If your bathroom tub or shower does not hold water when it is supposed to or you have just been using an ugly plastic sink stopper instead of replacing your pop up stopper the Flip-It is the perfect solution. It looks great and is easy to both install and use.
Flip-it bathtub drain stoppers will form a tight seal using our unique toggle ball system and are available in many plumbing supplies stores or online.
Plumbing Supplies for Plumbers: Bathtub and Shower Drains
With all the different plumbing manufacturers, replacing a pop-up stopper in a bathroom tub or shower will often require more parts than can be kept on hand by a plumber in their van or even in their office. By stocking only a few Flip-It bath room tub drain stoppers, plumbers can be prepared to simply chose the right finish and right size O-ring to fit your clients sink and move on to the more complex and more profitable plumbing repairs.
Wholesalers/Suppliers: Eliminates need
to stock hundreds of different CWO repair parts!
|
Part# 90-325: PVD Brushed Nickel Flip-It® Tub Conversion Kit
with
Fit-All Overflow Plate Assembly
 PVD Brushed Nickel Flip-It Conversion Kit
contains everything you need to replace your old drain and
tub face plate (drain lever).
Conversion Kit Includes:
- PVD Brushed Nickel Flip-It tub stopper
- 10 "O" Rings to fit various size tub drains
- a fit-all overflow face plate assembly with screws and adapter
strap.
Comes in an individual package with easy to follow
installation instructions. |
|
Part# 50-300: PVD
Brushed Nickel Flip-It® Tub Stopper in Slide Blister
Packaging
PVD Brush Nickel Flip-It tub stopper with 10
"O" rings to fit various size tub drains.
Comes in an individual package with easy to follow installation
instructions.
Also packaged and sold in Poly Bag:
Part# P-126: PVD Brushed Nickel
Flip-It® Tub Stopper in Poly Bag Packaging |
When installed, Flip-It® looks very attractive
Back to Top
Call for a retailer near you: 1-800-473-1803
PVD (physical vapor deposition)
Today, most manufacturers use a technology called PVD (physical
vapor deposition) for their faucet finishes. PVD finishes are considered
practically indestructible. PVD can be used on almost any material
from brass to plastic.
The complete PVD finishing process from cleaning to final inspection
takes place under clean room conditions that include hygienic air
purification, pressurized to reduce dust and other contaminants.
Individual parts are hung on racks and travel through a proprietary
nine-step ultrasonic, aqueous cleaning process. Sound-wave vibrations
and chemicals thoroughly clean and prepare the surface for coating.
The cleaning process contains no chlorinated solvents or other ozone-depleting
chemicals.
After drying and inspection, the parts are taken to the PVD chamber
for the coating process. This process combines reactive gases such
as nitrogen and acetylene with specific metals to form a thin, film-like
metal alloy that coats metal parts creating an elegant, highly durable
finish.
The chamber is controlled by a computerized system that stores
and monitors 64 individual processes customized to meet specific
parameters for various parts and different finishes, such as brushed
nickel, copper and oil-rubbed bronze. These finishes are darker
and not particularly shiny which gives them a unique, muted look.
PVD finishes offer exceptional richness and depth, and are resistant
to discoloration by sunlight. In addition, in abrasion tests conducted
by independent testing laboratories, PVD finishes have been found
to be more than 23 times more resistant than chrome plating.
All PVD finishes are not created equal, however. All products finished
with the PVD process must first have a finished surface of some
sort. In most cases, products are chrome plated then processed in
a PVD chamber for coloring.
Each of the manufacturers has a different name for their finishes
which use this process, but the procedure is similar. Regardless
of the type of finish, however, harsh abrasives should always be
avoided when cleaning faucets. The average PVD faucet will cost
20% to 35% more than chrome.
Fits the
following Manufacturer's Bath Plug: |
American Brass
*American Standard
Bridgeport Brass
Crane
Dearborn Brass
Delta
Duracraft |
Eljer
Frost
*Gerber
Harcraft
Indiana Brass
J & B Products
*Kohler |
McGuire Manufacturing Co.
Milwaukee
Moen
*Price Pfister
Royal Brass
Sanitary Dash
Savoy
|
*Speakman
Sterling
Union Brass
Watco Plastics, Inc.
Wolverine Brass
Note: Plus other Brass
Goods Manufacturers |
| *most models |
Back to Top |
